Ruth's sister 30x20cm Linear Polarizing Film Sheet internal power cable
A 30x20cm linear polarizing film sheet with 99.99% efficiency and 42% single transmittance for physics experiments and imaging applications
- High contrast linear polarizer for clear imaging
- 42 % single transmittance across 380–700 nm spectrum
- 99 % polarizing efficiency blocks unwanted glare
- 30 × 20 cm neutral gray sheet fits LCD panels
- Thin 0.25 mm TAC+PVA film handles easily
Polarizing Film Sheet 30x20cm
This linear polarizing film sheet measures 30x20cm and uses TAC+PVA material with a neutral gray finish. It provides 99.99 percent polarizing efficiency across the 380 to 700nm wavelength range. The sheet is designed for educational physics, photography and imaging experiments.
Upgrade from basic filters
The high contrast transmissive optical type delivers 42 percent single transmittance and only 0.005 percent crossed transmittance. This jump is worth it when you need precise polarization control for birefringence studies or light scattering demonstrations. Standard filters cannot match this extinction ratio.
Check your setup before ordering
Verify that your application requires a linear polarization axis of 50mm and a film thickness of 0.25mm. Ensure the 30x20cm dimensions fit your optical holder or experimental frame. Allow for a 0 to 1cm measurement tolerance due to manual cutting.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 30x20cm sheet fit inside my LCD panel frame?
The film measures approximately 30cm by 20cm with a thickness of 0.25mm, so check your panel's internal clearances against those dimensions.
How do I install the polarizing film without damaging the TAC+PVA layers?
Clean the LCD surface thoroughly, align the 50mm polarization axis, then apply the 0.25mm sheet slowly to avoid bubbles; the 150µm film thickness makes it prone to creasing if rushed.
When will the 99.99% polarizing efficiency degrade enough to need replacement?
The TAC+PVA material maintains 42% single transmittance and 0.005% crossed transmittance across 380-700nm; replace if contrast drops or neutral gray color shifts noticeably.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





