Ruth's sister 3pcs 4 Pin Molex IDE Male to 4P ATA Female Power Cable to Floppy Drive Adapter 200mm
Three 200 mm cables convert a standard Molex connector to a floppy-drive power plug for legacy drives or CF-card adapters
- Converts Molex to floppy power for legacy drives
- 200mm length fits tight chassis routing
- Three cables included for multiple device connections
- Powers CF-card adapters replacing mechanical hard drives
- Supplies auxiliary power to 1394 and graphics cards
Three-piece Molex-to-floppy power adapter kit
This set includes three 200 mm cables that convert a standard large four-pin Molex connector into a small four-pin floppy-drive power plug. Each adapter lets you supply power to legacy floppy drives or compact-flash cards from a modern PSU. The kit suits retro builders and soft-router projects running DOS or Windows 98.
Male Molex to female floppy connectors
The large four-pin male end plugs into any available Molex lead from the power supply, while the small four-pin female end mates with floppy drives or peripheral cards that require the smaller interface. The 200 mm length provides enough reach for typical drive-bay routing without excess slack. No extra certification markings are present on the cables.
Check Molex availability and device power needs
Verify that your power supply has at least one free Molex connector for each adapter you plan to use. Confirm that the target device — whether a floppy drive, CF-card adapter or 1394 card — expects power through a small four-pin floppy-style socket. The cables do not convert voltage, so the PSU must already deliver the correct rail for the attached hardware.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the length of the Molex-to-floppy power cable?
The cable is 200 mm long, providing a short reach from a standard 4-pin Molex connector to a floppy-drive-style 4-pin power input.
What connector types does the adapter use for the floppy drive end?
The adapter terminates in a small 4-pin female ATA connector, matching the traditional floppy-drive power interface found on legacy drives and some expansion cards.
How do I connect the three adapters to my power supply?
Plug each male Molex end into a spare 4-pin Molex lead from the PSU, then attach the female floppy connector to the device needing auxiliary power.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





