Ruth's sister 4-pin Molex to 5 SATA power cable 18AWG 40cm
Converts a single 4-pin Molex connector into five SATA power ports using 18AWG tinned copper wire with woven mesh sleeving over 40cm length
- Expands one Molex port into five SATA power connectors
- 18 AWG tinned-copper conductors deliver reliable current
- 40 cm length with 4 cm spacing fits typical drive cages
- Woven mesh sleeve keeps wiring tidy and protected
- Lightweight 32 g design adds minimal load to the case
Power Cable for SATA Expansion
This internal power cable splits a single four-pin Molex connector into five SATA power plugs. It is designed for builders who need to run multiple SATA drives or accessories from one power-supply lead.
18 AWG Tinned Copper Conductors
The cable uses 18 AWG tinned copper wire rated for the current demands of up to five SATA devices. This gauge is the specification that determines whether the splitter can safely deliver power without excessive voltage drop.
Woven Mesh Sleeving for Airflow
A woven mesh wrap keeps the 40 cm cable bundle tidy, reducing clutter that can obstruct case airflow. The lightweight 32 g assembly adds minimal strain on the power-supply connector during normal operation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many drives can I run from one Molex connector with this cable?
The splitter provides five SATA power connectors from a single 4-pin Molex, so up to five SATA drives can be powered.
What wire gauge is used and how does it affect current delivery?
18 AWG tinned copper conductors handle the combined load of five SATA devices within typical power-supply limits.
Will the 40 cm length and 4 cm spacing reach drives in a standard tower case?
The cable is 40 cm long with 4 cm between each SATA connector, fitting most mid-tower drive cages.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





