Ruth's sister 4 Port POE Injector internal power cable
Four-port PoE injector powers IP cameras, VoIP phones and Wi-Fi access points from a single 12–48 V supply at up to 3 A
- Powers four PoE devices from one supply
- 10/100 Mbps data rate on every port
- 12 V to 48 V input accepts common adapters
- Compact 10 × 4 × 3 cm plastic housing
- LED indicator shows power status at a glance
4 Port POE Injector for IP cameras
This injector adds Power over Ethernet to four camera feeds from a single DC source. It suits installers who need to power VoIP phones, Wi-Fi access points or surveillance cameras without individual adapters. The module accepts 12 V to 48 V input and shares the available current equally across all ports. A built-in LED shows when power is present.
Check switch ports and DC supply voltage
Verify that your network switch or router provides four free RJ-45 ports for the data connections. Confirm the external power supply delivers between 12 V and 48 V and can supply up to 3 A total current. Each LAN+Power output uses pins 4/5 and 7/8 for power while pins 1/2 and 3/6 carry 10/100 Mbps data. The DC jack measures 2.1 mm by 5.5 mm.
Thermals noise and power draw
The plastic enclosure operates from 0 °C to 50 °C with no fan, so it runs silently in normal use. Power consumption depends on the connected devices, with a maximum combined output of 3 A across the four ports. No active cooling is required and the unit produces no audible noise. Storage temperature range extends from -40 °C to 70 °C.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the package include a power supply or only the injector itself?
The box contains one 4-port POE injector module. No power supply is included; you must provide a 12 V–48 V DC source with a 2.1 mm × 5.5 mm plug.
How many cameras can I run from the four ports and what total current is available?
All four ports share the same voltage and divide the available current equally, up to a combined 3 A maximum output.
The spec lists 10/100 Mbps — will that limit my 1080p IP cameras?
10/100 Mbps TIA/EIA 568B-2 provides 100 Mbps per port, which is sufficient for typical 1080p streams but not for higher-bitrate 4K feeds.
More in Internal PSU & Riser Cables
Similar items
Micro Connectors F04-240W-KIT White internal power cable kit
- White
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister F14 2.4GHz Wireless USB Optical Mouse 2400DPI 7 Buttons
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





