Ruth's sister 40cm 1-to-5 4-pin Molex PWM fan hub power splitter cord
A 40 cm cable expands one motherboard PWM header to five fans with shared speed control
- Expands one PWM header to five fans
- 40 cm cable aids tidy cable routing
- Self-adhesive mount lets you hide the PCB
- Channel one reports RPM to the motherboard
- Works with 3-pin and 4-pin fan connectors
Fan Hub for Multi-Fan Builds
This PWM splitter expands a single motherboard header to drive up to five fans. It suits enthusiasts who need coordinated speed control across several chassis coolers. The 40 cm cable length helps with internal routing. Self-adhesive backing allows the PCB to be secured out of sight.
PWM Signal Shared Across Five Ports
All connected fans follow the identical PWM signal from the motherboard. Only the CPU Fan channel passes an RPM signal back to the board, so monitoring software reports the speed of the fan plugged into channel one. Three-pin fans run at full speed because they lack PWM control pins.
Sustained Operation Without Speed Drift
Because every fan receives the same PWM duty cycle, speeds remain locked together during prolonged loads. The hub draws power directly from a Molex connector, removing the current limit of the motherboard header. No RPM feedback from channels two to five means the board cannot react to individual fan stalls.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 89% of the 428 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many fans can run from one motherboard PWM header using this splitter?
One 4-pin motherboard PWM header can drive up to five fans through this hub, all following the same PWM signal.
What happens to RPM monitoring when five fans are connected?
Only the fan plugged into the CPU Fan channel (channel 1) sends an RPM signal back to the motherboard; the other four channels do not report speed.
What length and mounting aid does the cable include?
The cable is 40 cm long and comes with a self-adhesive pad so the small PCB can be stuck inside the case for tidy routing.
More in Y-Splitter Power Cables
Similar items
ZLKSKER DH112257 4 Pin PWM Fan Hub 1 to 5 Splitter 33 cm
- Male to Female
- Male-to-Female
4XEM 4XHDMIVGA10FTU 10ft HDMI to VGA adapter cable with USB power
Cable Matters 5210YGDX6493 USB C Splitter 1 in 2 Out Power Splitter Cord
- DVI to DVI
- Female to Male
Shenzhen Aimilai Technology Co.Ltd. 12-Way 5V RGB LED Splitter Hub with PMMA Case and Magnetic Standoff
Cable Matters 8 Pin PCIe Splitter Cord 13-inch 18AWG
- DVI to DVI
- Female to Female





