Ruth's sister 433 MHz Superheterodyne Receiver Module internal power cable
A 433.92 MHz superheterodyne receiver module with up to -110 dBm sensitivity and 3 V to 5.5 V supply range
- High-sensitivity reception down to -110 dBm for reliable wireless links
- Superheterodyne architecture rejects interference from multiple nearby modules
- Ultra-low 50 nA power-enable current extends battery life
- Wide 3 V to 5.5 V supply range suits 3.3 V and 5 V logic
- Industrial -40 °C to 85 °C operation withstands harsh environments
433.92 MHz Superheterodyne Receiver
This 433.92 MHz superheterodyne receiver module suits engineers and hobbyists building wireless control systems. It operates from a 3 V to 5.5 V supply and draws 6.0 mA at 3.3 V. The RXB6 design provides sensitivity up to -110 dBm for reliable data capture in remote door, alarm or curtain applications.
Compact board with analog RSSI output
Measuring 4.2x2 mm the module fits tight enclosures and can run multiple units side by side without mutual interference. An analog RSSI signal strength output lets firmware monitor link quality. Power-enable mode drops consumption to 50 nA extending battery life in portable sensors.
Industrial temperature range -40 to 85
Rated from -40 to 85 the board withstands harsh ambient conditions found in automotive or outdoor installations. No certification is declared so compliance testing remains the integrator responsibility. Single-piece quantity supports prototyping before volume orders.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What frequency does the 433.92 MHz superheterodyne receiver operate on?
The module operates at a fixed frequency of 433.92 MHz, which is the standard ISM band used for remote controls, wireless sensors, and data links in Europe and many other regions.
What voltage range and current draw does the RXB6 module require?
It accepts a supply voltage from 3 V to 5.5 V and typically draws 6.0 mA at 3.3 V, with a power-enable mode that can reduce consumption to as low as 50 nA.
How should the RSSI output pin be connected for signal-strength monitoring?
The analog RSSI pin provides a voltage proportional to received signal strength; connect it to an ADC input on your microcontroller and read the level to gauge link quality or trigger wake-up logic.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





