Ruth's sister 6.35mm to 3.5mm TS Mono Adapter Cable 1.8m
Connects 6.35 mm mono devices to 3.5 mm mono inputs with a 1.8 m gold-plated cable and 90-degree right-angle plug
- Connect instruments with 6.35mm jack to 3.5mm inputs
- 8m cable length gives flexible placement options
- Gold-plated connectors ensure stable signal transfer
- Right-angle 3.5mm plug reduces strain on device ports
- Male-to-male TS mono design suits audio equipment
TS Mono Adapter for Audio Integration
This 1.8 metre cable converts a 6.35 mm mono TS plug to a 3.5 mm mono TS plug, letting musicians and engineers patch instruments, mixers or amplifiers into portable recorders, laptops or compact interfaces. The right-angle 6.35 mm end reduces strain on panel-mounted jacks in tight rack spaces.
Male-to-Male Wiring with Gold Contacts
Both ends are male, so the adapter sits directly between a source and an input without extra couplers. Gold-plated contacts preserve signal integrity across the 1.8 m run, while the PVC jacket resists kinking when routed around pedalboards or desk edges.
Stable Transfer Over Extended Sessions
The mono TS wiring carries a single unbalanced channel, so hum rejection depends on the connected gear rather than the cable itself. Under continuous use the metal shells and strain reliefs maintain a secure fit, preventing intermittent drop-outs during long rehearsals or broadcasts.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum cable length before signal loss becomes noticeable?
The cable is 1.8 metres (5.9 ft) long, suitable for typical instrument-to-mixer runs without significant signal degradation.
Does the gold-plated 6.35 mm TS plug run hot or add noise during extended sessions?
Gold-plated contacts resist corrosion and maintain low resistance, so the adapter stays cool and adds no audible noise during all-day use.
Which devices must already have 6.35 mm and 3.5 mm TS mono jacks for this cable to work?
You need a source with a 3.5 mm TS mono output and a destination with a 6.35 mm TS mono input, such as a laptop to a mixing console.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





