Ruth's sister 6Pin to Dual 6+2Pin Splitter Ribbon Cable 18AWG 50cm
Converts a single 6-pin PSU connector into two 6+2-pin GPU power plugs using 18 AWG ribbon cable 50 cm long
- Splits one 6-pin into two 6+2-pin connectors for dual GPU power
- 18 AWG conductors handle high current with minimal voltage drop
- 50 cm ribbon layout keeps cable routing tidy inside the case
- Red plug marks PSU end, black plug marks GPU end for error-free connection
- Compatible with Anatek NP, TP and Zun series modular power supplies
Power splitter for dual GPU connectors
This 18AWG ribbon cable splits a single 6-pin modular PSU output into two 6+2-pin PCIe connectors. It is intended for builders who need to power a graphics card that requires two 8-pin inputs from a power supply with limited native PCIe leads.
Verify modular PSU pin-out before connecting
The red 8-pin end plugs into the power supply and the black ends plug into the graphics card. Because modular pin-outs vary by manufacturer, confirm that the PSU side matches the Anatek NP, TP or Zun series layout described. Do not use with other power supplies unless the pin-out is identical.
18AWG conductors on a 50cm flat ribbon
The flat ribbon construction keeps the two output leads together for tidy routing inside the case. 18AWG wire handles the current required by typical dual 8-pin graphics cards. The fixed 50cm length suits standard ATX chassis layouts without excess slack.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 6-pin to dual 6+2-pin splitter ribbon cable come with any extra connectors or mounting hardware?
The cable is supplied as a single 18AWG ribbon assembly with a red 6-pin PSU plug and two black 6+2-pin GPU heads; no additional connectors or hardware are included.
When should I use this 50 cm 18AWG splitter versus a longer or thicker-gauge alternative?
Choose this 50 cm 18AWG splitter when the PSU 6-pin port sits close to the graphics card and the card needs two 8-pin inputs; longer runs or higher current draws may need a heavier gauge.
What does the 18AWG rating mean for real-world power delivery to my graphics card?
An 18AWG conductor at 50 cm can safely carry the current required by a typical dual 8-pin graphics card without excessive voltage drop or heating.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





