Ruth's sister 8-pin to dual 6+2-pin PCIe power splitter cable 22 cm
Splits one 8-pin PCIe connector into two 6+2-pin plugs using 18 AWG tinned-copper wire, 22 cm long
- Splits one 8-pin into two 6+2-pin connectors
- 22 cm length keeps cable runs tidy
- 18 AWG tinned copper handles high current loads
- 5559 and 5557 interfaces ensure secure seating
- PVC insulation rated to 80 °C for safe operation
Product identity
This is a new 22 cm internal power splitter cable from Ruth's sister. It converts a single 8-pin PCIe source into two 6+2-pin connectors for graphics cards or mining rigs. Builders with limited PSU outputs use it to add a second GPU power line without replacing the power supply.
Critical specification
The cable uses 18 AWG tinned copper conductors rated for 80 °C with PVC insulation. Each 6+2-pin end mates with 5557 slide-rail headers while the source end fits a 5559 8-pin socket. This wire gauge and connector pairing determines whether the assembly can deliver the current your card demands.
Capacity and headroom
The 22 cm length and 32 g weight suit tight routing inside compact cases. Two 6+2-pin branches cover most dual-connector GPUs, but cards requiring three or more PCIe plugs will still need additional cables or a higher-output PSU.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power can each 6+2-pin connector deliver when the cable is running from a single 8-pin supply output?
The cable uses 18 AWG tinned-copper conductors rated for 80 °C, which are the same gauge used on standard PCIe power leads, so each 6+2-pin end carries whatever the PSU’s 8-pin rail is rated for.
What connectors are on each end of the splitter?
One end has a 5559 8-pin plug that goes into the power supply, and the other end splits into two 5557 6+2-pin slide-rail plugs that can be used as either 6-pin or 8-pin.
Will the 22 cm length reach from my PSU to a graphics card in a mid-tower case?
At 22 cm the cable is designed for tight routing; measure the distance from your PSU’s 8-pin socket to the GPU’s power inputs to confirm it spans the gap without strain.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





