Ruth's sister 8025 80mm 12V 4-pin internal power cable
An 80 mm oil-bearing chassis fan with a 4-pin 12 V connector runs at 1200 rpm and delivers 26 to 58 cfm at 18 to 35 dB
- Oil-bearing sleeve runs quietly at 18-35 dB noise
- 4-pin 12 V connector fits standard PSU headers
- 80 × 80 × 25 mm frame installs in 80 mm bays
- 1200 ± 10 % rpm delivers 26-58 cfm airflow
- 40 000-hour rated life reduces replacement frequency
80 mm 12 V 4-pin chassis fan
This 80 mm square fan fits a standard 8025 mounting pattern and runs from a 12 V four-pin header. It is intended for builders who need a direct replacement or additional airflow in a computer chassis. Buyers who require a different voltage, connector type or frame depth will need another model.
Thermals noise and power draw
Rated speed is 1200 rpm with a tolerance of ±10 %, delivering an air volume between 26 and 58 cfm. Acoustic output ranges from 18 to 35 dB with a ±3 dB variance, while the oil-containing bearing is rated for 40 000 hours of service life. Power consumption follows the 12 V supply rail.
8025 mounting and four-pin interface
The frame measures 80 mm by 80 mm by 25 mm, matching the 8025 form factor used in many power supplies and chassis. A four-pin plug provides both power and speed control on a single connector. Verify that your device has the matching header and clearance before purchase.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 8025 fan with its 4-pin interface and what step do people often miss?
Align the 4-pin connector with the motherboard or fan-controller header, press it straight in until it clicks, and verify the keyed notch matches — the step most people miss is forgetting to check the notch orientation before forcing the plug.
What maintenance will the oil-containing 8025 fan need after its 40000-hour service life?
The sleeve bearing is sealed with lubricating oil and is not user-serviceable; once the 40000-hour rating is reached the entire 80 mm fan should be replaced rather than re-oiled.
At what noise level does the 8025 fan hit its limit during sustained 1200 rpm operation?
Under continuous load the fan tops out at 35 dB ± 3 dB, which is the acoustic ceiling you will hear before thermal or voltage limits are reached.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





