Ruth's sister BL20-E-8DO-24VDC-0.5A-P 6827226 internal power cable
Internal power cable module with eight digital outputs rated at 24 VDC and 0.5 A per channel
- 8 digital outputs rated at .5 A each
- 24 V DC operation for industrial control systems
- 20-pin BL20 backplane interface for secure mounting
- New module manufactured in 2023
- Part number 6827226 for exact ordering
Internal power cable for 24 VDC systems
This internal power cable is built for 24 VDC control cabinets and automation panels. It suits integrators wiring BL20 I/O modules who need a reliable factory-fresh connection. The part arrives new and ready for immediate installation.
Sustained load behaviour on 0.5 A circuits
Rated for a continuous 0.5 A per channel, the cable maintains stable delivery across all eight digital outputs during extended duty cycles. Voltage drop stays predictable because the conductor cross-section matches the module specification. No derating is required within the stated 24 VDC operating window.
Deciding specification: eight 24 VDC outputs
The critical figure is the 0.5 A per channel limit across eight outputs. If your load exceeds this current, or if you need a different voltage rail, this cable will not suit the application. Verify the module part number 6827226 against your Bill of Materials before ordering.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $168.99
- Pricier than about 92% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the 6827226 module draw when its eight outputs run at 24 VDC all day?
Each output is rated at .5 A at 24 VDC, so the module can supply up to 4 A total across all eight channels when fully loaded.
What backplane or bus system must already be installed for the BL20-E-8DO-24VDC-0.5A-P to operate?
The module is designed for the BL20 I/O system, so a compatible BL20 base or gateway unit must be present.
Will the 6827226 module work alongside older BL20 slices that were purchased before 2023?
Yes, it uses the same BL20 backplane interface, so it can be mixed with earlier BL20 I/O modules in the same station.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





