Ruth's sister CR-10 Brass Heated Block 20x20x10mm
Brass heated block for CR-10 3D printers, measuring 20x20x10mm with M6 and M3 mounting holes
- Brass construction resists wear for longer service life
- 20 mm square block fits CR-10 hot-ends
- M6 and M3 set-screw holes secure heater and sensor
- 6 mm heat-pipe bore matches standard cartridges
- M6 nozzle thread works with common throats
Brass Heated Block for CR-10 Printers
This brass heated block is designed for CR-10 3D printers and similar all-metal hotends. It serves as a direct replacement part for maintaining or upgrading the extruder assembly. The component is manufactured from premium brass for high temperature resistance and extended service life. Machined with high precision, it has been tested for reliable high-temperature printing performance.
M6 and M3 Threaded Mounting Holes
The block features an inner hole for set screws with M6 and M3 threads to secure the heater cartridge and thermocouple. It accepts a 6 mm diameter heat pipe and a 3 mm diameter thermocouple for standard sensor installation. The nozzle interface uses M6 threads for compatibility with matching extruder nozzles and heat-insulated components. These specific thread sizes determine whether the block fits your existing hotend configuration.
Brass Construction Handles Sustained Heat
Premium brass construction provides consistent thermal conductivity during extended printing sessions. The material resists deformation at elevated temperatures required by high-temperature filaments. Precision machining ensures tight contact between the block, heater cartridge, and temperature sensor for stable thermal control. The compact 20x20x10 mm form factor integrates into standard CR-10 hotend assemblies without modification.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How does the 20x20x10mm size affect fit inside a CR-10 hotend?
The block matches the standard CR-10 heater-block footprint, so it seats directly in the existing mount without adapter plates or spacing shims.
What does the M6 nozzle thread and 6 mm heat-pipe bore mean for compatibility?
M6 threads accept any standard CR-10 nozzle, while the 6 mm bore fits the stock heat-break and 3 mm thermocouple hole without re-drilling.
What physical clearance does the brass block need for mounting?
Allow roughly 20 mm square by 10 mm tall plus room for the M6 nozzle, 6 mm heat-break and M3 set-screw access on the side.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





