Ruth's sister D12-240P2A internal power cable
A 240 W internal power supply for SFF workstations with 100-264 V input, 4-pin CPU and 6-pin graphics connectors, non-modular design and CE certification
- 240W output powers small-form-factor workstations reliably
- Active silent cooling keeps noise low in quiet offices
- 100–264 V input handles global mains without a switch
- 6-pin GPU and 4-pin CPU connectors fit common SFF boards
- CE certification confirms basic safety compliance
Purpose-built SFF replacement
This 240 W unit fits HP Z240 600 800 G1 G2 small-form-factor workstations and the 705 G1 SFF. It delivers 100-264 V input and carries CE certification. The non-modular design keeps cable routing simple for service technicians.
Suits direct OEM swap; not for custom builds
Technicians replacing a failed 702307-002 or 751884-001 unit in the listed chassis will find the correct pin-out and mounting. Builders assembling new systems or needing modular cables should look at standard ATX supplies instead.
Fixed cable set with 4-pin CPU and 6-pin GPU
The harness provides one 4-pin CPU connector and one 6-pin graphics connector plus a P2 lead. No additional modular sockets are present, so the available outputs are exactly those three.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $44.99
- Pricier than about 81% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What connectors does the 240W PSU provide for graphics and CPU power?
The unit includes one 6-pin connector for a graphics card and one 4-pin connector for CPU power.
Which chassis and motherboard form factors does the D12-240P2A fit?
It is designed for SFF workstations such as the Z240, 600, 705, 800 G1 and G2, using the standard SFF PSU bracket.
How do I install this non-modular PSU and what step is often missed?
Mount the supply in the SFF bay, secure it with the chassis screws, then plug the fixed 4-pin CPU and 6-pin GPU cables into the motherboard and graphics card; the step often missed is connecting both power cables before closing the case.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





