Ruth's sister Fast Connector Fiber Quick Connector Optical Fiber Mechanical Splices internal power cable
Mechanical splice connects 0.25 mm and 0.9 mm fibres with a metal V-groove for precise alignment and CE-certified reliability
- Fast connector speeds up FTTH and repair jobs with simple operation
- Metal V-groove aligns 0.25mm and 0.9mm fibres for high butt precision
- Good sealing keeps matching fluid in place for strong weather resistance
- CE certified adapter meets declared safety requirements
- Compact ABS body measures 40 x 0.2 mm for tight internal routing
Optical fibre quick connector
This mechanical splice joins 0.25 mm and 0.9 mm fibres without fusion equipment. It is aimed at installers repairing FTTH links or building new drops in the field. The CE marked adapter uses a metal V groove to align cores and index matching fluid to minimise loss. No polishing or power tools are required for a permanent joint.
Tool free field termination
The connector accepts both common fibre diameters so one part covers repair and new build scenarios. Its ABS housing snaps shut around the prepared fibres removing the need for a separate cradle or heat shrink sleeve. Installers save the weight and cost of a fusion splicer while still achieving low insertion loss on single mode or multimode cable.
Passive low loss joint
The splice introduces no active components so it adds no power draw or electromagnetic noise to the link. Sealed construction keeps the matching fluid stable across temperature swings and outdoor exposure. Long term reliability comes from the fixed V groove geometry rather than moving parts that can wear.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 0.25 mm and 0.9 mm fiber combinations hold alignment after repeated thermal cycles?
The metal V-groove design keeps butt precision high across temperature swings, and the CE-certified ABS housing resists weathering so the seal stays intact.
Does the connector generate noticeable heat or require extra power during continuous FTTH operation?
It is a passive mechanical splice with no active electronics, so it produces no heat and draws no power once installed.
What tools or consumables are needed before I can terminate a fiber with this connector?
You only need a standard fiber cleaver and stripper for 0.25 mm or 0.9 mm fiber; the connector includes its own index-matching fluid and requires no epoxy or polishing.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





