Ruth's sister HDMI Extender 30 m Cat5e/6 Pair
A pair of HDMI-to-RJ45 extenders transmits 1080p signals up to 30 metres over Cat5e/6 cable with plug-and-play setup
- Transmit 1080p up to 30 metres over Cat6 cable
- Extend 4k*2k signals using standard network cabling
- Plug-and-play pair works instantly without any configuration
- HDCP 1.1 and 1.2 support protects premium content
- Supports 3D 1080p and multiple resolutions including 1920x1200
HDMI extender over Cat5e/6
This HDMI-compatible extender pair transmits 1080p signals up to 30 metres using standard Cat5e or Cat6 network cable. It replaces long HDMI runs with a single Ethernet link between the transmitter and receiver units. The set supports signalling rates up to 1.65 Gbps and handles resolutions from 480i through 1080p and 4k*2k. No configuration is required beyond connecting the cables.
Hard plastic housing with dual RJ45 ports
Each unit is housed in black hard plastic and presents a female HDMI connector alongside dual RJ45 ports for the network cable. The plug-and-play design supports hot-plugging, so sources or displays can be swapped without power cycling. Cat5e or Cat6 cabling handles the extension, simplifying installation in walls or trunking where bulky HDMI leads would be impractical.
Pair includes transmitter and receiver
The package supplies one complete pair — a transmitter and a receiver — so both ends of the link are covered immediately. HDCP 1.1 and 1.2 compliance allows protected content to pass through without handshake issues. Supported formats include 3D 1080p, 720p, 1080i, 1920×1200 and 4k*2k, covering common AV and PC resolutions.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How far does the Cat6 link carry a 1080p signal?
The extender transmits 1080p up to 30 meters over a single Cat6 cable between the transmitter and receiver.
What cables and ports are required to connect the two units?
Each unit has an HDMI female port and two RJ45 jacks; you need one Cat5e or Cat6 patch cord between them plus HDMI cables at both ends.
Is any driver or configuration step needed before the link works?
No software is required — connect the HDMI sources, link the RJ45 ports with Cat5e/6, power both units, and the 1.65 Gbps signal passes through automatically.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





