Ruth's sister HLK-10M05 5V 10W internal power cable
Converts 90-264 VAC mains to a regulated 5 VDC 10 W output in a compact isolated module
- Converts 90-264 VAC to stable 5 VDC output
- Delivers 10 W continuous power at 2 A load
- Compact 46.9×27.8×21.8 mm footprint fits tight enclosures
- Operates reliably from -20 °C to 60 °C ambient
- RoHS certified with isolation up to 2000 m altitude
AC-DC step-down module for 5 V DC systems
The HLK-10M05 converts mains input from 90 to 264 VAC into a regulated 5 VDC output rated at 10 W. It suits builders who need a compact isolated supply for low-voltage logic, sensors or microcontroller boards inside an enclosure.
Thermal profile in a 10 W load
Rated dissipation is 10 W across an operating range of -20 to 60 °C with storage tolerance down to -40 °C and up to 80 °C. The plastic-bodied module relies on natural convection; no forced-air provision is included.
Plastic enclosure and PCB-mount footprint
The board measures 46.9 by 27.8 by 21.8 mm and is certified to RoHS. Mains terminals accept 100 to 240 VAC input while the low-voltage side delivers 5 V at up to 2 A. Installation altitude is rated to 2000 m.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I wire the HLK-10M05 module to a 220 V mains supply without creating a shock hazard?
Connect the AC input pins only to a 90–264 VAC source rated 100–240 VAC, keep all connections inside an earthed enclosure, and never touch the board while power is applied.
What component of the HLK-10M05 is most likely to require replacement after long-term operation?
The internal electrolytic capacitors on the primary side will degrade first, especially if the module runs continuously near the 60 °C upper operating limit.
At what point does the HLK-10M05 hit its thermal limit during sustained 10 W output?
Continuous 10 W dissipation at ambient temperatures above 60 °C will exceed the rated operating range and trigger over-temperature protection.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





