Ruth's sister internal power cable 20 24 pin SATA 8 pin 220v
Tests ATX, BTX and ITX power supplies via 20+4 pin, SATA and 8-pin CPU connectors with LCD voltage readout at 220 V input
- Tests 20 + 4Pin ATX and BTX supplies
- Monitors 3.3V 5V 12V rails on LCD
- Checks SATA HDD power connectors
- Includes 8 pin CPU power socket
- Runs from 220v mains without batteries
Power supply tester for ATX and BTX units
This digital LCD tester checks desktop and server power supplies with 20+4 pin, SATA, and 8 pin CPU connectors. It displays voltage status on the built-in screen without requiring batteries. The tool is intended for hobbyists and technicians who need a quick functional verification.
Tests standard ATX, BTX, and ITX rails only
The unit monitors +3.3V, +5V, +12V, -12V, -5V, and +5VSB lines through its fixed connectors. It cannot measure load capacity, ripple, or efficiency, and it does not support proprietary or server-specific pinouts beyond the listed interfaces. Input voltage is rated for 220v mains supply.
Plug in the 24 pin and CPU cables to begin
Operation starts by connecting the supply's 24 pin and 8 pin cables to the corresponding jacks on the tester. No software or external power is required. The main limitation is that the device only indicates presence and approximate level of each rail, not stability under load.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 62% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 20-pin or 24-pin version for my ATX supply?
The tester uses a combined 20+4 pin connector so it fits both 20-pin and 24-pin ATX power supplies without needing a separate adapter.
What does the LCD actually show when the unit is running?
The LCD displays the voltage status for each rail including +3.3V, +5V, +12V, -12V, -5V and +5VSB so you can verify each output is within tolerance.
Does the SATA connector on the tester limit the voltages I can check?
The SATA connector is an additional test point; the unit still monitors all standard ATX rails through the 20+4 pin and 8-pin CPU connectors so no voltage reading is capped by the SATA interface.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister NGFF M.2 to USB 2.0 Type-C Adapter Card with SIM Card Slot
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister HDMI USB Socket Motherboard for Switch internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





