Ruth's sister internal power cable 460W 466610-001 DPS-460DB-2A
A 460W server power supply with 6 SATA connectors, active PFC and 80 PLUS certification for ML150G6 and ML330G6 systems
- 460W output powers ML150 G6 and ML330 G6 servers
- 24-pin ATX plus 8-pin CPU connector fits server motherboards
- Six SATA power ports support multiple storage drives
- Active PFC corrects power factor across 90-264 V input
- Non-modular design keeps all cables permanently attached
Server ATX PSU 460W for ML150G6 ML330G6
This 460W server ATX power supply carries part number 466610-001 and model DPS-460DB-2A. It is built for HP ML150G6 and ML330G6 systems. The unit is new and non-modular with a fixed cable set.
24-pin ATX plus 8-pin CPU and six SATA connectors
The main motherboard connector is a 20+4 pin ATX plug. An 8-pin CPU power connector is provided alongside six SATA ports for drives. Seven Molex and two 4-pin peripheral connectors complete the loom.
Active PFC 90-264V input sustained delivery
Active power factor correction handles a wide 90-264V AC input range. The 460W rated output is maintained under continuous server load rather than only in short bursts. The 80 PLUS Other certification indicates baseline efficiency during extended operation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $83.99
- Pricier than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 460W rating mean once the supply is installed in a server?
The 460W figure is the maximum continuous power the unit can deliver to the motherboard, drives and add-in cards when operating within its 90-264V input range.
What does the 20+4 pin interface cap in practice?
The 20+4 pin ATX connector limits the supply to motherboards that accept a standard 24-pin ATX power header, capping total system power at the unit's 460W rating.
What clearance and mounting points does the unit need to fit in an ML150 G6 or ML330 G6?
It uses the standard PSU form factor for the ML150 G6 and ML330 G6 chassis, securing with four rear screws and requiring the usual depth and airflow clearance for a non-modular server supply.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister DPS-300AB-81B 300W 20-pin internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister 19.5-inch LM195WX1-SLC1 industrial LCD internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





