Ruth's sister internal power cable 85x40mm AAA
A compact water-leak detector with a 360-degree probe that sounds a high-decibel alarm when its two contacts sense moisture, powered by a 9 V supply drawing 0.08 mA in alarm and 0.01 µA at rest.
- Compact 85x40mm size fits tight spaces
- ABS plastic construction resists corrosion
- 360° detection angle covers all directions
- 01uA quiescent current extends battery life
- Operates from -10 to 55°C in varied environments
Water leak detector for facilities
The ABS plastic sensor measures 85 by 40 millimetres and sounds a high-decibel alarm when its dual probes contact water. It operates on a 9 volt supply with a quiescent draw of 0.01 microamps and an alarm current of 0.08 milliamps. Suitable locations include computer facilities, server rooms, water heaters and air-conditioning units.
Sustained monitoring behaviour
The unit draws only 0.01 microamps while idle, allowing continuous operation without draining the 9 volt source. When water bridges the probes the alarm activates immediately across a 360 degree detection angle. Operating range spans minus 10 to 55 degrees Celsius for year-round deployment.
Replaces basic floor sensors
This device upgrades from simple passive indicators by adding an audible warning and a caution light for faster response. The jump is worthwhile when unattended areas such as basements, laboratories or file rooms need instant notification rather than periodic visual checks. Avoid mounting near metallic conductors and keep the unit flat and level.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the alarm draw from a 9 V battery while it runs continuously?
The alarm uses a quiescent current of 0.01 uA and an alarm current of 0.08 mA at its 9 V operating voltage.
What power source must the buyer supply for this detector to operate?
A 9 V battery is required; the unit has no plug and does not draw power from a motherboard or PSU.
Will the alarm still function inside a chassis that reaches 55 °C?
Yes, the specified working temperature range is -10 to 55 °C, so it tolerates typical internal case heat.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





