Ruth's sister Internal Power Cable Bluetooth 2.1 3.7-5V 3W 10M 80dB
Bluetooth 2.1 receiver board adds wireless audio to speakers with 3 W output, 10 m range and 80 dB SNR
- Bluetooth 2.1 connectivity for wireless audio streaming up to 10 m range
- 3 W output power drives speakers directly from a compact board
- Operates on 3.7 V to 5 V DC for flexible power options
- >80 dB signal-to-noise ratio keeps playback clean and clear
- Frequency response 10 Hz to 20 000 Hz covers full audible range
What this board does
The Ruth's sister Bluetooth 2.1 receiver amplifier board accepts a DC supply between 3.7V and 5V and delivers 3W of audio output. It integrates an MP3 decoder and a digital-to-analog converter so you can stream wirelessly to passive speakers or add Bluetooth to an existing audio project. The Class 2 radio gives a typical range of about 10 metres.
Check your power source first
Verify that your project can provide a stable DC voltage within the 3.7V to 5V window before ordering. The board draws its supply and audio power from the same rails, so a sagging or noisy source will degrade the 80dB signal-to-noise ratio. No external antenna or separate amplifier stage is required, but the supply must be capable of sustaining the load.
What the package includes
The box contains one audio amplifier board only; no speaker, enclosure, wiring harness or mounting hardware is supplied. You will need to connect your own speakers and provide a suitable 3.7V to 5V power feed. The onboard Bluetooth 2.1 and MP3 decoding functions are ready to use once power and speakers are attached.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box with the Ruth's sister Bluetooth 2.1 amplifier board and what else is needed?
The package includes one audio amplifier board. A DC power source between 3.7V and 5V and speakers must be supplied separately.
Which version of the Ruth's sister board should I choose for a 5 V supply and 10 m range?
This single version operates from 3.7 V to 5 V, delivers 3 W output, uses Bluetooth 2.1 Class 2 and reaches about 10 m.
What does the 3 W output figure mean when the board is installed in a speaker system?
It provides up to 3 W of audio power into a connected speaker with a signal-to-noise ratio above 80 dB across 10 Hz to 20000 Hz.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





