Ruth's sister internal power cable for 600W Flex ITX PSU
Cable kit connects a fully modular 600 W Flex ITX PSU to motherboard, CPU, graphics and SATA devices
- Designed for 600W continuous output at 40°C
- Fully modular design keeps builds clean and tidy
- Japanese primary capacitor ensures long-term stability
- Single +12V rail delivers consistent power
- Wide 90V-264V input suits global use
Cable kit for 600 W Flex ITX PSU
This internal cable set completes a fully modular 600 W Flex ITX power supply rated for continuous operation at 40 °C. It provides the 24-pin motherboard connector, a 4-pin CPU power lead, two 6-pin PCIe connectors and two SATA power plugs for drives. The kit suits builders assembling compact desktops or 1U servers that use the Flex ATX form factor.
Replaces fixed-cable SFX or TFX units
Swapping a non-modular supply for this modular kit removes unused cables from a tight chassis, improving airflow in 1U and small-form-factor builds. The upgrade is worthwhile when the existing PSU lacks the 600 W capacity on a single +12 V rail or when cable clutter prevents proper drive placement in a dense server node.
Limited by Flex ATX length and connector count
The Flex ATX standard restricts the physical length of the power supply, which in turn caps the maximum cable reach inside larger cases. Only two SATA power connectors are supplied, so configurations with more than two SATA drives will need additional adapters. The 90-264 V input range covers global mains voltages without manual switching.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $77.99
- Pricier than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Which connectors does the cable set provide for a 600W Flex ITX PSU?
The set includes a 24-pin ATX connector, a 4-pin CPU power connector, two 6-pin PCIe connectors for graphics cards, four D-type connectors and two SATA power connectors.
How are the cables attached to the PSU, and what step is often missed?
Because the PSU is fully modular, each cable plugs into its keyed port on the unit; the step often missed is pushing each connector until the latch clicks, ensuring full contact.
What component inside the PSU is most likely to need replacement after years of 24/7 operation at 40°C?
The Japanese primary capacitor on the single +12V rail is the component most likely to require replacement after extended 24/7 use at 40°C.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister 700W Alimentatore Dual CPU internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





