Ruth's sister NVMe 2280 SSD Heatsink internal power cable
A copper heatsink with 17 thermal pads cools an NVMe 2280 SSD using 386.4 W/m·K conductivity and a 0.8 mm plate
- High thermal conductivity copper plate rated at 386.4w/m.k
- Oxidation-resistant surface stays clean after long-term use
- Seventeen silicone thermal pads included for optimal contact
- Precision-machined 74 x 22 mm dimensions fit 2280 form factor
- Copper construction with 0.8 mm thickness ensures efficient heat transfer
Copper Heatsink for NVMe 2280 Drives
This copper heatsink is built for NVMe 2280 solid-state drives that run hot under sustained workloads. It uses a high-conductivity copper plate rated at 386.4 W/m·K to pull heat away from the controller and NAND packages. The kit includes seventeen thermal pads, two mounting screws and a screwdriver for a complete installation.
Suits Compact Builds Needing Passive Cooling
Builders fitting a drive into a tight laptop, small-form-factor PC or expansion card will appreciate the slim 0.8 mm profile and 74 x 22 mm footprint. It adds no active noise and requires no motherboard headers. Buyers who want an integrated fan, a taller fin stack or a drive that already ships with a substantial heatsink should look at something else.
Steady Heat Spreading Under Long Writes
The copper plate and silicone pads work together to spread thermal energy across the full surface area during extended write sessions. Thermal performance remains consistent because the oxidation-resistant finish prevents surface degradation over time. Without forced airflow the assembly relies on case circulation, so temperatures will stabilise higher than with an active cooler.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What M.2 slot size does the 2280 heatsink fit?
The heatsink measures 74 x 22 mm and is designed for standard NVMe 2280 form-factor SSDs.
Can the copper plate and 0.8 mm thickness clear motherboard components near the M.2 slot?
At 0.8 mm thick the copper plate adds minimal height, but check your board's clearance around the M.2 key before installing.
How do I verify the thermal pads and copper plate are seated correctly after assembly?
Tighten the two included screws until the heatsink sits flat; the 17 silicone pads should compress evenly with no visible gaps.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





