Ruth's sister NVMe M.2 to PCIe x4 adapter riser card
Adapts M-key M.2 NGFF SSDs to a PCIe 3.0 x4 slot while preserving drive speed and dimensions
- Adds M.2 NVMe storage to any PCIe 3.0 x4 or wider slot
- Supports 2230 2242 2260 2280 M-key drives without speed loss
- Works driver-free on Windows 10 with Z97 or newer motherboards
- Transparent PCIe pass-through keeps full drive performance intact
- Simple form-factor conversion for NVMe SSDs on desktop platforms
M.2 to PCIe adapter for NVMe drives
This adapter lets you install an M-key M.2 NGFF NVMe solid-state drive into a standard PCI Express 3.0 x16 slot. It performs a physical interface conversion without altering the drive's native speed or behaviour. The card is transparent to the operating system and requires no additional drivers. It is intended for desktop builders who want to add NVMe storage on platforms lacking a native M.2 slot.
Check motherboard generation and chipset first
Your motherboard must be Z97 or a later Intel chipset and you must be running Windows 10 or newer. AMD chipset boards are explicitly not recommended by the supplier. PCI Express x4 NVMe drives such as the PM951, SM951 or PM950 will not function on chipsets below the 9 series. Verify that the board has a free PCIe x4, x8 or x16 slot before ordering.
Supports common M.2 lengths only
The board accepts M.2 modules in 2230, 2242, 2260 and 2280 form factors. No mounting screws, thermal pads or cloning software are included in the package. Booting from the adapted drive is only possible if your motherboard BIOS specifically supports PCIe device boot; otherwise the drive will appear only after the operating system loads.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What M.2 lengths does the adapter accept and is a mounting screw included?
The card fits 2230, 2242, 2260 and 2280 M-key modules; the package contains only the adapter riser card, so a screw must be sourced separately.
Does the board need a PCIe 3.0 x16 slot or will an x4 or x8 slot work?
It connects through any PCIe 3.0 x4, x8 or x16 slot and runs at x4 electrical width.
Will the drive appear in BIOS and boot on a Z97 motherboard with Windows 10?
Z97 or later chipsets are required; the drive is visible in the OS, but BIOS detection and boot support depend on the motherboard firmware.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





