Ruth's sister PC8061 internal power cable
180W ATX power supply with 20-pin, 4-pin and three SATA connectors for compatible Lenovo desktops
- 180 W output powers legacy desktops and servers
- Active PFC corrects power factor across 100-264 V input
- 20-pin ATX, 4-pin CPU and three SATA connectors included
- Non-modular design keeps cabling simple for ATX chassis
- 150 × 100 × 86 mm unit fits standard ATX mounting
180 W ATX power supply for legacy desktops
This 180 W ATX unit is built for older desktop platforms that require the PC8061 form factor. It suits repair technicians and hobbyists restoring systems where the original supply has failed. The non‑modular design keeps cabling fixed and installation straightforward.
Active PFC with 100‑264 V input range
Active power‑factor correction helps maintain efficient draw across the full 100‑264 V operating window. The 4‑pin CPU connector and single 20‑pin main connector deliver power without extra adapters. No PCIe graphics connectors are present, limiting use to integrated‑graphics configurations.
Fixed cables include three SATA connectors
The harness provides three SATA power leads for drives and a single 4‑pin CPU lead alongside the 20‑pin motherboard plug. Physical dimensions of 150 × 100 × 86 mm match the ATX mounting pattern used by the compatible models listed. Builders needing PCIe power or higher wattage must select a different unit.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $54.99
- Pricier than about 84% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the PC8061 power supply and what step is often missed?
Mount the 150 × 100 × 86 mm unit in an ATX bay, connect the 20-pin main, 4-pin CPU and three SATA leads, then set the 100-127 V / 200-240 V switch to match local mains before powering on.
What maintenance or replacement will the PC8061 need later?
Clean dust from the intake and exhaust areas periodically; the non-modular cables cannot be swapped individually, so a failed rail or damaged connector means replacing the whole 180 W unit.
What limit appears first when the PC8061 runs under sustained load?
The 180 W total output ceiling is reached before any single rail limit, so continuous draw near that level will trigger protection or voltage drop.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





