Ruth's sister PCIe 6-pin to 2x 6+2-pin Power Splitter Cable
Splits a single PCIe 6-pin connector into two 6+2-pin plugs for graphics-card power
- Splits one 6-pin PSU output into two 6+2-pin GPU connectors
- Magic 6+2 design works as either 6-pin or 8-pin plug
- Solves missing GPU power connectors on limited PSUs
- Internal power cable for desktop component builds
- New condition PCIe power splitter cable
Purpose and Audience
This PCIe power splitter cable adapts a single 6-pin supply connector into two 6+2-pin outputs for graphics cards. It suits builders whose power supply lacks enough native PCIe leads but can deliver the required wattage through one existing 6-pin socket.
Build and Connectors
The cable uses a 6-pin male plug on the supply side and two 6+2-pin female ends on the component side. Each 6+2-pin connector splits into a 6-pin or 8-pin form, letting you match either graphics-card requirement without adapters. Wiring is straight-through with no active electronics.
Compatibility Check
Verify that your power supply’s single 6-pin rail is rated for the combined draw of both graphics-card connectors. Confirm the cable length reaches from the PSU to the card in your case layout. Ensure the graphics card does not require more power than the supply’s 6-pin specification allows.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the single PCIe 6-pin connector on this splitter cable limit in practice?
It draws all power for both output connectors from one 6-pin source, so the combined load must stay within that connector's rated current.
What clearance does the 6+2-pin magic connector need to fit a graphics card?
The 6+2 design adds two removable pins beside the standard 6-pin block, so allow enough space around the card's power socket for the wider plug body.
How do you configure the magic 6+2 connector for a card that needs an 8-pin plug?
Keep the two extra pins attached to the main 6-pin block; they lock together to form a single 8-pin connector that seats in the card's 8-pin socket.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister JEYI Heat Sink 7mm Ultra-thin Solid State Hard Disk Heatsink internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





