Ruth's sister PIGGYBACK36 V1.0 internal power cable
A compact piggyback board that adds a tool-head terminal for SKR2 and Octopus motherboards, supporting 36- and 42-mm stepper motors with 5 V, 12 V or 24 V power options
- Expansion board for SKR2 and Octopus head terminal boards
- Supports 36 and 42 stepper motors for DDB extruder use
- Works with FLY-CDY, FLY-Gemini and all boards
- Runs on 5 V, 12 V or 24 V power supplies
- Compact 51 × 36 mm PCB weighing 25 g
Purpose and fit
The Ruth's sister PIGGYBACK36 V1.0 is an internal power cable accessory designed for 3D printer control boards such as the SKR2 Octopus. It connects to the head terminal board and supports both 36 and 42 stepper motors, making it suitable for builders working with compatible tool boards and extruder setups.
Before ordering
Verify that your motherboard runs KLIPPER, RRF or Marlin firmware and that your power supply can deliver 5V, 12V or 24V as required. The board measures approximately 51 by 36 millimetres and weighs 25 grams, so confirm available mounting space and that the optional fan voltage of 5V or VCC matches your cooling configuration.
Sustained operation
Under continuous use the PCB construction handles the specified supply voltages while driving up to 36 stepper motors and optional fans at 5V or VCC. The component is rated for 5V, 12V and 24V input, so thermal performance will depend on the chosen voltage and motor load rather than short bursts.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the PiggyBack36 V1.0 board ship with any cables or mounting hardware, or do I need to source them separately?
The package includes only the PiggyBack36 V1.0 3D accessory board; cables, screws or connectors for the SKR2, Octopus, FLY-CDY or FLY-Gemini motherboards must be sourced separately.
My printer uses 42 mm stepper motors — is the PiggyBack36 V1.0 still compatible or is there a different version for that size?
The board supports both 36 and 42 stepper motors, so the same PiggyBack36 V1.0 works with either motor size.
What does the 5 V, 12 V or 24 V power supply rating mean for my actual printer setup?
It means the board can run directly from your printer’s existing 5 V, 12 V or 24 V rail, and the optional fan voltage can be set to 5 V or VCC to match your cooling fan without an extra regulator.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





