Ruth's sister Proximity Switch Sensor E2E-S04N02-WC-C2 internal power cable
Internal power cable for proximity switch sensor E2E-S04N02-WC-C2, new condition listed April 2023
- Proximity switch sensor for automated detection
- Internal power cable ensures reliable electrical connection
- New condition guarantees full operational lifespan
- Model E2E-S04N02-WC-C2 identifies exact replacement part
- First listed by manufacturer April 2023
Internal Power Cable for Proximity Sensors
This cable connects a proximity switch sensor to an internal power source within industrial or automation equipment. It is intended for technicians and system integrators wiring the E2E-S04N02-WC-C2 model into control cabinets or machine frames.
Fixed Two-Metre Length Limits Routing Options
The supplied cable measures two metres, which restricts the distance between the sensor and the power supply. Installations requiring longer runs or custom routing will need an alternative cable or an approved extension method.
Three-Wire Configuration Determines Compatibility
The sensor uses a three-wire output, so the cable must match that exact wiring scheme. Builders using two-wire or four-wire sensors cannot use this cable without rewiring the connection.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $125.99
- Pricier than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What length or connector version of the E2E-S04N02-WC-C2 cable should I pick for my build?
The product page lists a single configuration for the E2E-S04N02-WC-C2 internal power cable, so there are no alternative lengths or connector versions to choose between.
How does the E2E-S04N02-WC-C2 proximity switch sensor perform once installed inside a system?
It detects the presence of metal objects at close range and sends a switching signal to the controller, allowing automated position sensing within the machine.
What interface standard does the E2E-S04N02-WC-C2 use and what does that limit in practice?
The sensor connects via a two-wire DC interface, which caps the wiring to a simple series circuit and requires the load to be powered from the same supply.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





