Ruth's sister RJ45 splitter combiner uPOE cable kit internal power cable
Passive PoE injector and splitter kit adds 5V to 48V power over Ethernet for IP cameras or access points up to 30–40 metres
- Passive PoE keeps input and output voltage identical
- Injector and splitter kit adds PoE to non-PoE devices
- Supports 5V, 12V, 24V and 48V power sources
- Works up to 30-40 metres with standard cabling
- Compact 18cm cables with 5.5 * 2.1mm DC connectors
Passive PoE injector and splitter kit
This two-piece kit converts a non-PoE device into a PoE-enabled one using passive power injection. The injector combines an RJ45 male connector with a 5.5 × 2.1 mm DC power input into an RJ45 female port. The splitter separates an RJ45 female input into an RJ45 male output and a matching DC power output.
Installers running IP cameras
Suited for technicians who need to deliver 5 V, 12 V, 24 V or 48 V over Ethernet up to 30–40 metres without a PoE switch. Not for buyers who require active PoE negotiation or standards-based power classification. Also unsuitable for runs beyond the stated distance or for devices drawing more current than the thin conductors can safely carry.
18 cm pigtail length with fixed 4,5/7,8 power pins
Each pigtail measures 18 cm (6.9 in) and uses pins 4,5 for positive and 7,8 for negative voltage. The short, fixed length dictates placement near the powered device or the source; longer reaches need a separate Ethernet patch cord. Voltage at the far end equals the input voltage because the kit is purely passive.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What power supply do I already need to use this injector and splitter kit?
You must provide the wall transformer that came with the device you want to power; the kit passes 5 V, 12 V, 24 V or 48 V unchanged from that supply.
Will the passive PoE links work with my existing Cat 5e cable runs?
Yes, the injector and splitter operate over standard Ethernet wiring up to 30 – 40 metres depending on cable quality and the powered device's current draw.
How can I confirm the kit is delivering power correctly after I connect everything?
Check that the powered device (IP camera, access point, etc.) boots and operates normally; the passive design means output voltage equals the input voltage you supplied.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-04412 12" Molex 5.25 Female to Female internal power cable
- 1 ft (0.3 m)
- Multi-Color
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





