Ruth's sister SAS to SATA Adapter Cable 587747-002 internal power cable
Adapts a SAS drive to a SATA connector for HP Z-series and XW-series workstations using an LSI 9212 card
- Connect SAS drives to SATA ports using PN 587747-002
- Works with XW6400 XW6600 XW8400 XW8600 Z400 Z420 Z210 workstations
- Enables SAS HDD installation with LSI9212 SAS card
- Converts SAS interface to SATA connector for drive compatibility
- New condition cable adapter ready for internal use
SAS-to-SATA adapter for HP workstations
This cable adapts a SAS connector to a SATA interface using part number 587747-002. It is designed for internal drive installations in HP workstation models including the XW6400, XW6600, XW8400, XW8600, Z400, Z420 and Z210. The adapter enables a SATA hard drive to connect to the system's SAS backplane or controller.
Suited for LSI 9212 SAS card upgrades
Installers fitting SAS drives into the listed workstations with an LSI 9212 SAS card will find this adapter matches the required pin-out. Builders working on other platforms, or those needing a direct SAS-to-SATA connection without this specific part number, should verify compatibility before purchasing.
Part number 587747-002 identifies the correct
The manufacturer part number 587747-002 is the single specification that confirms this adapter matches the wiring expected by the supported HP workstations and the LSI 9212 SAS card. Using a different part number risks an incorrect signal mapping and drive detection failure.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 62% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 587747-002 adapter generate extra heat when the SAS drive runs continuously?
The passive 587747-002 cable adds no active components, so it does not increase heat or power draw beyond the drive itself.
Which power connector must my PSU provide for this 587747-002 adapter to work?
Your power supply needs a standard SATA power plug; the 587747-002 converts only the data interface from SAS to SATA.
Will the 587747-002 let me keep my XW8400 workstation and LSI9212 card when I add a SATA drive?
Yes, the 587747-002 is listed for XW8400 systems using the LSI9212 SAS card to attach SATA drives.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister NGFF M.2 to USB 2.0 Type-C Adapter Card with SIM Card Slot
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister HDMI USB Socket Motherboard for Switch internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





