Ruth's sister SK16 3-in-1 adapter internal power cable
Converts a PCIe x16 slot into three drive connectors supporting NVMe, SATA and mSATA SSDs with dual-voltage power and a built-in indicator
- Supports NVMe, NGFF and mSATA drives on one card
- PCIe 3.0 x4 interface delivers full-speed data transfer
- Dual 2 V and 3.3 V power with tantalum capacitor for stable operation
- Built-in indicator shows drive activity at a glance
- Fits a standard PCIe x16 slot for easy installation
Triple-drive PCIe adapter
The Ruth's sister SK16 is a PCIe 3.0 x16 card that converts one slot into three drive connections. It accepts an NVMe M-key SSD, an AHCI B-key NGFF SSD, and an mSATA SSD at the same time. Power is supplied through dual 2 V and 3.3 V rails with an onboard tantalum capacitor and a status LED. The card targets builders who want to add multiple legacy and modern SSDs without occupying extra motherboard slots.
Suits multi-SSD upgrades.
This adapter fits enthusiasts consolidating NVMe, NGFF and mSATA drives into a single x16 slot, or repurposing spare SSDs on boards lacking dedicated M.2 sockets. It is not for users who only need one NVMe drive, because a direct M.2 slot or a single-drive riser will be simpler and cheaper. Systems without a free PCIe x16 slot cannot use the card at all.
PCIe 3.0 x16 slot required
The card plugs into a PCIe 3.0 x16 slot and exposes three input interfaces plus two 7-pin SATA power outputs. If the motherboard lacks a full-size x16 slot, or if the slot is wired for fewer lanes, the adapter will not fit or will not function. Verify the slot type before purchase.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What PCIe standard does the SK16 adapter use and what bandwidth does it cap at?
The SK16 uses a PCIe 3.0 x4 interface, limiting throughput to the Gen 3.0 x4 lane rate.
What physical slot and clearance does the SK16 require to mount?
It plugs into a PCIe x16 slot and adds two 7-pin SATA power connectors, so allow space for the card plus the power cables.
How is the SK16 installed and which step is often missed?
Insert the card into a PCIe x16 slot, attach both SATA power cables, then secure the M.2 and mSATA drives with their mounting screws — the screw step is frequently skipped.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





