Ruth's sister USB 2.0 to UART TTL 14PIN 1.8 2.5 3.3 5v internal power cable
Converts USB 2.0 to UART TTL with selectable 1.8, 2.5, 3.3 and 5 volt levels via a 14-pin connector
- Supports four voltage levels 1.8 2.5 3.3 5v
- 14-pin connector provides multiple signal connections
- USB 2.0 interface enables serial communication
- Compatible with Windows Linux Vista platforms
FTDI USB 2.0 UART adapter
This FTDI USB 2.0 to UART TTL module provides four selectable voltage levels of 1.8, 2.5, 3.3 and 5 volts through a 14-pin connector. It acts as a serial converter for direct communication with microcontrollers and embedded boards. The device connects via a standard USB 2.0 interface and is supported on Windows, Linux and Vista systems.
Replaces basic logic-level converters
The adapter replaces separate level-shifting circuits or fixed-voltage USB-to-serial cables when a project requires multiple logic voltages. The jump is worth it for developers who need one tool that covers 1.8, 2.5, 3.3 and 5 volt targets without swapping hardware. It is not for users who only need a single fixed voltage or who require isolation between host and target.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What devices can the 14PIN connector on this module connect to?
The 14PIN connector provides the interface for the four selectable voltage levels of 1.8V, 2.5V, 3.3V and 5V, allowing connection to target boards that require one of those logic levels.
How is the voltage level selected during installation, and what mistake should be avoided?
Install the supplied jumper on the header corresponding to the required logic level — 1.8V, 2.5V, 3.3V or 5V — and ensure only one jumper is fitted; placing jumpers on multiple headers at once can damage the connected device.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





