Ruth's sister VER007 60cm PCI-E riser internal power cable
A PCI-E 1x to 16x riser kit with a 60 cm USB 3.0 cable, four solid capacitors and a SATA 15-pin to 6-pin power adapter for mining rigs
- Extends graphics cards 60 cm via USB 3.0 cable
- Four solid capacitors stabilise GPU power delivery
- SATA 15-pin to 6-pin cable reduces motherboard load
- Gold-plated contacts ensure reliable long-term connectivity
- Fits 1x, 4x, 8x and 16x PCI-E slots
PCI-E 1x to 16x riser kit
The VER007 package converts a single PCI-E 1x slot into a 16x physical connector using a 60cm USB 3.0 cable. It includes the riser board, a 1x adapter, the extender cable and a SATA 15pin male to 6pin power cable. The kit is aimed at miners building multi-GPU rigs for BTC, LTC or ETH. No driver installation is required.
60cm USB 3.0 extender length
The 60cm cable sets the maximum spacing between the motherboard slot and the graphics card. Four solid capacitors on the riser board stabilise the graphics power delivery. Gold-plated contacts on both cards improve connectivity and service life. A side clip secures the mounted card in place.
Sustained mining load stability
Four solid capacitors and the dedicated SATA-to-6pin power cable reduce the electrical burden on the motherboard during continuous operation. The USB 3.0 link maintains signal integrity over the 60cm run under constant throughput. The assembly is designed for 100% duty-cycle mining workloads rather than intermittent gaming sessions.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 60 cm USB 3.0 cable limit bandwidth in a mining rig?
The extender uses a 60 cm USB 3.0 cable to carry PCI-E 1x signals, so the link runs at PCI-E 1x speed regardless of the 16x slot on the riser card.
What does the SATA 15-pin to 6-pin power cable actually deliver?
It converts a SATA 15-pin connector from the power supply into a 6-pin plug that feeds the riser card, moving GPU power draw off the motherboard.
Will the 12.8 cm by 4.3 cm riser card fit inside a standard mining frame?
The card measures 12.8 cm by 4.3 cm by 1.5 cm and includes a side clip, so it mounts on typical open-air frames with standard slot spacing.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs DB9 Female to RJ45 Adapter Connector rs232 modular cab-9as-fdte internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





