Ruth's sister Waterproof PoE Splitter internal power cable
A waterproof PoE splitter cable adapter separates power and data for 100M equipment while connecting two devices to a single switch
- Waterproof ABS body suits outdoor network monitoring
- Simple plug-and-play setup needs no configuration
- 100M PoE equipment connects directly through splitter
- Two devices share one switch port simultaneously
- 8-core to 4-core design saves cable cost
Professional waterproof PoE splitter
The Ruth's sister waterproof PoE splitter is an internal power cable adapter designed for outdoor network monitoring systems. It separates power and data from a single PoE feed so two devices can connect to the internet simultaneously through one switch port. The ABS body uses a waterproof design suited for exposed installations.
Sustained load behaviour
Under continuous operation the splitter maintains a direct connection to 100M PoE equipment without requiring configuration. The 8-core to 4-core conversion saves cable runs while keeping both linked devices online. No performance degradation is described for long-term monitoring workloads.
Setup checks
Verify that your cabling uses standard 8-core wiring compatible with the 4-core output arrangement. Confirm the installation site matches the waterproof rating implied by the ABS housing. Ensure the connected PoE switch and endpoint devices both operate at the supported 100M speed.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the PoE splitter draw when it runs continuously?
The unit itself is a passive cable adapter with no active electronics, so it adds no measurable power draw beyond the connected devices.
What must I already have for this splitter to work in my installation?
You need a PoE-capable switch or injector supplying 100M PoE power, plus two Ethernet devices such as cameras or access points to connect.
Will this adapter work with my older 10/100 Mbps network gear?
Yes, it is designed for direct connection to 100M PoE equipment and uses an 8-core to 4-core wiring scheme compatible with legacy Fast Ethernet devices.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





