Ruth's sister XY-AP50H internal power cable 20W stereo
Class D stereo amplifier board with Bluetooth, AUX, USB-C disk and USB-C sound card inputs delivering 20 W per channel at 12 V into 4 Ω
- Bluetooth and wired inputs give flexible playback
- 20 W per channel into 4 Ω at 12 V
- Built-in protections prevent damage from faults
- App control switches modes and sound effects
- Supports 10–200 W passive or active speakers
What this board does
This Ruth's sister XY-AP50H board is a Class D stereo amplifier built around a single XY-AP15H chip. It delivers up to 20 watts per channel into a 4-ohm load at 12 volts and accepts DC input from 5 to 27 volts. The unit ships as a bare board that requires the user to fit the protection circuitry and heat sink.
Who it suits and who it does not
Makers building compact audio projects who can provide their own enclosure, cooling and protection board will find the flexible 5-27 V supply range and four input modes practical. Buyers needing a finished, ready-to-play amplifier with integrated heat-sinking and certified safety compliance should look at complete modules instead.
The spec that decides fit
Maximum output is 20 watts per channel at 12 volts into 4 ohms; at 8 ohms the same supply yields 10 watts per channel. If your speakers demand more continuous power or a different impedance match, this board will not meet the requirement.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What input voltage range can the XY-AP50H board accept for continuous operation?
The board runs on a DC supply between 5 V and 27 V rated at 2 A or more.
Does the amplifier include a heatsink or must I fit one myself?
The heatsink and protection board are not fitted; the note states you need to install them yourself.
What speaker impedances and power ratings are supported by the stereo outputs?
Left and right channels drive 4 Ω or 8 Ω speakers rated from 10 W up to 200 W.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





