Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB DDR4 2666 ECC Registered 288-pin server memory with CL19 latency and 1.20V operation
This 32GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.20V operation. It is built as a 288-pin dual-rank 2Rx4 registered DIMM with error-correcting code. The specification targets servers and workstations that require registered memory for stability.
Systems using unbuffered or non-ECC memory cannot accept this registered module; the jump is only possible when the platform explicitly supports registered ECC DIMMs. The change is worth it when data integrity and multi-DIMM capacity scaling are required for the workload.
Confirm the exact motherboard model appears on the supplier's compatible Supermicro list before ordering. Registered DIMMs must match the platform's rank and voltage requirements, and mixing registered with unbuffered memory is not supported.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Model name | M393A4K40CB2-CTD |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Size & build | |
| Shipping weight | 0.11 kg |
| Package size | 171 × 51 × 13 mm |
The module uses a standard 288-pin DDR4 DIMM slot; it fits any server board that accepts registered DDR4 memory at 1.20V.
After seating the DIMM fully until the ejector tabs click, you must enter the BIOS and verify that the memory is running at DDR4 2666 with CL19 timings and that ECC is enabled.
Persistent corrected ECC errors logged by the BMC or OS, or any uncorrectable memory fault that causes a system halt, signal that the module should be swapped out.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?