Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1600 ECC registered server memory model M393B1G73DB0-YK0 with CL11 latency and 1.35V operation
This 8 GB DDR3 1600 module is built for servers and workstations that require error-correcting registered memory. It operates at 1.35 V with a CAS latency of CL11 and uses the standard 240-pin form factor. The stick has no heat spreader, keeping the profile low for dense configurations.
Replaces unbuffered or lower-speed DDR3 DIMMs when data integrity and signal stability are required. The registered buffer reduces electrical load on the memory controller, making the jump worthwhile for multi-DIMM channels or mission-critical workloads. Systems limited to 1.5 V DDR3 will not support the 1.35 V operating voltage.
Installation follows the usual 240-pin DDR3 slot alignment; press evenly until the latches click. The most common issue is mixing registered and unbuffered modules, which prevents boot. Verify the platform supports 1.35 V DDR3 1600 and registered ECC before seating the DIMM.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Model name | M393B1G73DB0-YK0 |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 140 × 51 × 13 mm |
The module uses the standard 240-pin DDR3 form factor and 1.35 V operation, matching server slots wired for PC3-12800 memory.
Align the key notch, press firmly until both side clips click, then verify the system recognises the registered buffer and ECC at 1600 MT/s.
DDR3 DRAM has no moving parts; plan replacement only if ECC logs show rising correctable errors or a DIMM fails POST.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?