Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1600 ECC Registered server memory module with CL11 latency and 1.50V operation
This 8GB DDR3 module adds registered ECC capacity to compatible server platforms. It operates at 1600MHz with a CAS latency of 11 to deliver 12.8 GB/s bandwidth. The registered design helps reduce electrical load on the memory controller in multi-module configurations.
ECC circuitry detects and corrects single-bit errors during continuous operation without halting the system. Registered buffering stabilises signal integrity across all 240 pins when the memory bus is fully populated. CL11 timing at 1.50V maintains consistent latency under prolonged heavy access patterns.
The dual-rank x4 layout allows higher total capacity per channel compared to single-rank alternatives. Major-brand DRAM components are validated for 24/7 server environments where uptime is critical. Buyers needing non-ECC unbuffered memory for desktop platforms cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Model name | M393B1K70DH0-CK0 |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 305 × 76 × 25 mm |
The module operates at the standard 1.50V DDR3 voltage; actual power draw depends on the server platform and workload, but registered DIMMs typically consume slightly more than unbuffered equivalents due to the register.
The system must support DDR3 registered ECC DIMMs; consumer boards that only accept unbuffered non-ECC memory will not recognise the module.
Mixed ranks and latencies are usually supported; the memory controller will run all channels at the slowest common timing, so the new module will operate at CL11 alongside the existing CL9 sticks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?