Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1600 ECC registered server memory, Samsung M393B2G70DB0-CK0, CL11 latency, 1.50 V operation
This 16GB Samsung module runs at DDR3 1600 (PC3 12800) with CL11 latency and 1.50V operation. It uses a 240-pin form factor and a 2Rx4 registered design with on-die ECC. The component targets servers and workstations that require registered memory with error correction.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC circuitry detects and corrects single-bit errors without halting the system. CL11 timing at 1600 MT/s delivers steady bandwidth for multi-threaded workloads that keep all ranks active.
The 240-pin DDR3 interface limits maximum module density and signal rate compared to newer generations. Registered DIMMs require a compatible chipset and cannot be mixed with unbuffered memory in the same channel. Voltage is fixed at 1.50V with no lower-voltage profile defined.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Model name | M393B2G70DB0-CK0 |
| Total capacity | 16 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 165 × 51 × 13 mm |
At 1.50 V the modules draw standard DDR3 power; registered buffering shifts electrical load to the memory controller, so thermals stay comparable to other DDR3 1600 ECC RDIMMs in the same chassis.
Yes — the module is a 240-pin DDR3 SDRAM with ECC and registered buffering, so the board must provide DDR3 ECC RDIMM support.
The memory controller will run all populated slots at the slowest common timing, so the CL11 module will operate at CL9 when mixed with CL9 sticks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?