SANOXY Cat6A Shielded Ethernet Cable 75 ft 26AWG 10Gbps 500MHz Gold RJ45 Non-Booted Blue
Shielded Cat6A patch cable delivers 10Gbps at 500MHz over 75ft with 26AWG pure copper and gold-plated RJ45 connectors
- Supports 10Gbps speeds with 500MHz bandwidth for high-speed networking
- Shielded STP construction reduces electromagnetic interference and crosstalk in dense environments
- Pure bare copper 26AWG conductors ensure excellent conductivity and minimal signal loss
- 50-micron gold-plated RJ45 contacts resist corrosion for long-term stable performance
- Non-booted connector design saves space and simplifies installation in tight high-density setups
Close-Range 10 Gbps Connectivity
This shielded Cat6A patch cable delivers 10 Gbps throughput and 500 MHz bandwidth over a 75 ft run. It is built for installers and network managers who need reliable high-speed links between patch panels, switches, or side-by-side equipment in dense racks.
26 AWG Conductors and Shielded Pairing
Pure bare copper 26 AWG strands and overall foil shielding keep crosstalk and electromagnetic interference low. The thin gauge eases routing in tight cable managers, while the 50-micron gold-plated RJ45 contacts resist oxidation for long-term signal integrity.
Non-Booted Design for High-Density Patches
The connector lacks a protective boot, saving millimeters per port so adjacent jacks remain accessible. This suits retrofit jobs where existing bootless cables are being replaced, but it offers no strain relief for runs that suffer frequent tugging or movement.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $65.99
- Pricier than about 87% of the 9,917 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SANOXY Cat6A network ethernet cable 30FT shielded STP 10Gbps 500MHz 26AWG gold plated RJ45 non-booted black
SANOXY Cat6A Shielded STP Ethernet Cable 50FT 10Gbps 500MHz 26AWG Gold Plated RJ45 Non-Booted Black
SANOXY Cat6A Shielded Ethernet Cable 75FT 10Gbps 500MHz 26AWG Black
SANOXY Cat6A Shielded STP Network Ethernet Cable 100FT 10Gbps 500MHz 26AWG Gold RJ45 Non-Booted Blue
Questions about this item
Will the 26AWG Cat6A cable handle 10Gbps on my older Gigabit switch ports?
Yes, the cable is backward compatible and will negotiate the highest speed both devices support, so it runs at 1Gbps on Gigabit ports while remaining ready for 10Gbps upgrades.
How can I verify the 500MHz shielded link is performing correctly after installation?
Check the link lights for a solid 10G connection, then run a throughput test such as iPerf3; sustained rates near 10Gbps with low retransmits confirm the 500MHz bandwidth is being used.
Does the 75ft blue cable include the gold-plated RJ45 connectors or must they be purchased separately?
The cable arrives terminated with 50-micron gold-plated RJ45 connectors on both ends; nothing extra is required for a standard patch-cord installation.
More in Ethernet & LAN Cables
Similar items
Cables To Go 31360 Cat6 network ethernet cable 75 ft Gray
- RJ45
- RJ45
Nippon Labs 60CAT8-50-24GY Cat8 network ethernet cable 50 ft 24 AWG 2000 MHz 40 Gbps gray
- RJ45
- RJ45
Belkin A3X126-07-YLW-M Cat5e Crossover Network Ethernet Cable 7 ft Yellow
- 5E (Crossover)
- Consumer Electronics
Micro Connectors 150 ft CAT6A Outdoor Shielded Ethernet Cable Kit White IP68 Coupler
- 150 ft (45.7 m)
- White
Belkin A3L791-06 network ethernet cable Cat 5E 6 ft Gray
- 5E
- Consumer Electronics
DRIPSTONE DS611 Cat6 Outdoor Ethernet Cable 500ft 23AWG Black
- Cat6
- Outdoor Ethernet Ca…










