Seagate Nytro 3530 3.2TB SAS 12Gb/s 2.5" enterprise SSD (XS3200LE10003)
3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance
- Total capacity3.2 TB
- Sequential read speedUp to 1,060 MB/s
- Sequential write speedUp to 950 MB/s
- Interface typeSAS 12Gb/s
- Form factor2.5 in (6.35 cm)
- NAND flash typeeMLC
- High-capacity 3.2TB drive stores more enterprise data
- Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
- 5" form factor fits dense server bays
- 3 DWPD endurance rating handles heavy write workloads
- SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth
Enterprise SAS SSD for high-capacity workloads
The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.
Sustained performance under dual-port bandwidth
The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.
Direct 2.5-inch bay installation with SAS backplane
The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.
How it compares
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
- Price $947.99
- Typical for this category: the median of 1,039 items is $992.99.
- Total capacity 3.2 TB
- Typical for this category: the median of 522 items is 3.2 TB.
- Sequential read speed Up to 1,060 MB/s
- Lower than about 68% of the 311 comparable items (median 6,500 MB/s).
- Price per TB $296.25 per TB
- Cheaper than about 79% of the 522 comparable items (median $595.64 per TB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Seagate |
| Model name | XS3200LE10003 |
| Total capacity | 3.2 TB |
| Performance | |
| Sequential read speed | Up to 1,060 MB/s |
| Sequential write speed | Up to 950 MB/s |
| Storage | |
| NAND flash type | eMLC |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Shipping weight | 0.20 kg |
| Package size | 229 × 152 × 76 mm |
Questions about this item
How much power does the XS3200LE10003 draw during sustained 24Gb/s wide-port operation?
The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.
Which server backplane and controller combination is required for the 2.5" SAS 12Gb/s form factor?
The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.
Will the Nytro 3530 negotiate down to 6Gb/s SAS on my existing 3000-series controller?
The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.
More in Server & Data Center SSDs
Similar items
Intel Optane SSD DC P4800X SSDPE21M375GA01 375GB enterprise SSD
- 375 GB
- 2.5 in U.2
Solidigm D5-P5336 122.88TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD SBFPFWBV0P12OF1
- 122.88 TB
- E1.L 9.5 mm
Solidigm SSDSC2KB960GZ01 D3-S4520 960GB 2.5" SATA enterprise SSD
- 960 GB
- SATA III





