Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 250 W replacement lamp module rated for 2,000 to 4,000 hours, supplied with housing for immediate installation
This 250W lamp module includes a new Phoenix SHP bulb inside a complete housing. It is built for owners of compatible Sharp projectors who need a ready-to-install replacement. The unit arrives fully assembled for immediate use. No separate bulb handling is required during installation.
Swap this module in when the existing lamp reaches the end of its rated life or when image brightness drops noticeably. The jump is worth it when the projector warns of lamp replacement or when colour fidelity degrades in normal viewing conditions. Rated life spans 2000 hours in normal mode and 4000 hours in economy mode. A fresh lamp returns the projector to its factory light output.
Light output declines gradually over the rated hours until the projector signals replacement. The lamp cannot exceed its 250W power rating or the 2000 to 4000 hour design life. Compatibility is restricted to projectors that accept the PG-F312X form factor. Buyers who need a different wattage or a non-Sharp fitting cannot use this module.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Sharp |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 4,000 (Economy) Hrs. |
| Power | |
| Power rating | 250 W |
The lamp arrives as a fully assembled bulb and housing unit that matches the original ANF212LP form factor, so it slides straight into the projector’s lamp compartment without extra brackets.
After seating the module, the projector’s lamp-hour counter must be reset through the on-screen menu; otherwise the unit will still show the old lamp’s hours and may shut down early.
Expect about 2000 hours in normal mode or 4000 hours in economy mode before brightness drops enough to warrant a new module.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?