Shenzhen Aimilai Technology Co.Ltd.
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
Extends a PCIe 3.0 x4 slot by 20 cm with a flexible, gold-plated cable suited for 1U or 2U chassis
- Product colorBlack
- Extends PCIe 3.0 4x cards by 20 cm cable length
- Total 24 cm reach fits 1U and 2U chassis
- Gold-plated connectors resist oxidation for stable 8 Gbps signals
- Bolted PCB shield prevents solder-point tears and short circuits
- Dustproof caps protect contacts during installation and storage
PCIe 3.0 4X Extension Cable
This cable extends a PCIe 3.0 x4 slot by 20 cm, with a total assembly length of 24 cm. It is built for 1U and 2U chassis where the card must sit away from the motherboard. The gold-plated connector and axial cable maintain Gen 3 signalling integrity. Installers who need a longer reach or a different form factor should look elsewhere.
Thermals noise and power
The cable carries only signalling and auxiliary power from the slot, so it adds no active heat or noise. Its flexible construction routes cleanly in tight server enclosures without blocking airflow. Gold-plated contacts keep resistance low, avoiding extra voltage drop. No external power input is required.
Sustained load behaviour
The PCB is bolted and nut-fixed to the cable, preventing solder-point fatigue during continuous Gen 3 8 Gbps operation. A dustproof cap protects the connector when the link is not in use. The design targets stable throughput in densely packed 1U or 2U systems over long duty cycles.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How do I install the PCIe 3.0 4X extension cable in a 1U or 2U chassis?
Connect the gold-plated connectors to the motherboard slot and the expansion card, route the 20 cm flexible cable at any angle, and secure the PCB with the supplied bolts and nuts to prevent stress on the solder points.
What maintenance or replacement will the PCIe 3.0 4X extension cable need later?
The dustproof caps protect the connectors when not in use; no scheduled maintenance is required, and the cable should only be replaced if physical damage or signal degradation appears.
What is the maximum sustained data rate of the PCIe 3.0 4X extension cable?
The cable is rated for stable PCIe Gen3 operation at 8 Gbps per lane across the full 24 cm total length.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





