Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds a front-panel USB-C port to a USB 3.1 header using a 40 cm cable with panel-mount screws
This 40 cm cable connects a motherboard USB 3.1 front-panel header to a Type-C female port that mounts in a case cut-out. Builders adding a modern USB-C front port to an older chassis use it to bridge the internal header without replacing the board. The short length keeps routing tidy inside compact enclosures. It is not for systems that lack a USB 3.1 header or for external device charging.
At 40 cm the trace stays well within USB 3.1 electrical limits so sustained transfers hold rated bandwidth without the drop-off seen on longer extensions. The direct header-to-panel path avoids extra junctions that can add jitter during large file moves. Builders running backups or disk imaging see consistent throughput across the whole session. It does not add active signal conditioning for runs beyond the supplied length.
The cable carries only signal and bus power so it generates no measurable heat and needs no airflow. Connectors are moulded strain-relief types that stay secure under normal case vibration. No fan, pump or active cooling is involved and the assembly adds negligible load to the motherboard header power budget. It is not suited for high-current charging applications beyond the header specification.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | USB A to USB B |
The passive 40 cm cable carries only the signals and power the port negotiates, so it adds no measurable heat or idle draw during continuous use.
The cable requires a standard USB 3.1 19-pin front-panel header on the motherboard; without that header the connector cannot be attached.
Yes, the USB 3.1 interface is backward compatible, so legacy USB 2.0 peripherals will function at their normal speeds when plugged into the Type-C female port.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?