Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds two USB-C and two USB-A 3.0 ports to a 3.5-inch bay via a 20-pin header with GL3520 chipset
This hub converts a motherboard USB 3.1 or USB 3.0 header into four front-facing ports. Two USB-C and two USB-A sockets are provided in a single 3.5-inch drive-bay bracket. It targets builders who want modern device connections at the front of a desktop case without using rear I/O. The GL3520 controller manages the port split from a single internal header.
Each port can deliver up to 900 mA of current for connected devices. The hub negotiates SuperSpeed at 5 Gbps, Hi-Speed at 480 Mbps, or Low-Speed at 1.5 Mbps depending on the attached peripheral. Under continuous multi-port load the shared upstream link divides bandwidth among active ports, so aggregate throughput will be lower than the single-port maximum.
It upgrades a case that only offers a legacy front-panel header or no front USB-C ports. The jump is worth it when you regularly attach USB-C drives, phones or accessories and want them accessible at the front. Builders who need more than four simultaneous high-bandwidth devices or who lack a spare 3.5-inch bay should look elsewhere.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | USB A to USB B |
The hub is powered from the motherboard's USB 3.1 or USB 3.0 20-pin header and each port supplies up to 900 mA, so total draw stays within the header's rated capacity without active cooling.
You need an available USB 3.1 front-panel header or a USB 3.0 20-pin header on the motherboard to plug in the supplied cable.
Yes, the GL3520 chipset supports USB 1.1 low-speed at 1.5 Mbps, so legacy peripherals function normally alongside USB 3.0 and 2.0 devices.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?