Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.5 m USB 2.0 cable with an inline 6-speed dimmer switch and stripped, tinned ends for wiring 5 V LED strips or lamps
This 1.5 m cable provides a USB 2.0 Type-A male plug on one end and stripped, tinned wires on the other. An inline switch offers six brightness or speed steps plus an off position, rated for 1 A at 5 V DC. It suits LED strips, small desk lamps, USB fans and similar low-power 5 V devices.
The switch interrupts the 5 V supply directly, so dimming or fan speed changes remain stable during continuous operation. No data lines are used, meaning the cable draws no enumeration current and adds no protocol overhead. The copper conductors and PC housing maintain consistent voltage delivery across the 1.5 m length at the 480 Mbps USB 2.0 signalling rate.
Each of the five black cables ships with the wire ends pre-stripped and tinned, ready for solder joints or screw terminals without further preparation. The inline switch body is moulded from PC material and sits between the USB plug and the flying leads, allowing panel or enclosure mounting. The 1 A switch rating matches typical USB port limits, so no external supply is required for supported loads.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SinLoon |
| Product type | USB |
| Product color | Black |
| Performance | |
| Rated speed | 480 Mbit/s |
| Ports & slots | |
| Connection type | Male |
| Connector count | 8 |
| Connector details | Male |
| Connector gender | Male to bare wire |
| Size & build | |
| Build details | Copper |
The switch is rated for 1 A at 5 V so it should stay cool with a 1 A load; no active cooling is needed.
You must provide a 5 V USB power source such as a wall adapter or power bank and solder or crimp the tinned leads to your device.
The cable uses USB 2.0 only for 5 V power; the six dimming levels are controlled by the inline button and work independently of the host port speed.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?