Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 2133 CL15 1.2 V 4Rx4 ECC LRDIMM for high-density server workloads
This SK hynix 64GB DDR4 2133 module is a 288-pin LRDIMM with ECC and a 4Rx4 rank structure. It operates at 1.20V with a CAS latency of CL15 and carries Supermicro certification for validated compatibility. The load-reduced design allows higher per-slot capacity in supported platforms.
Administrators expanding Supermicro-qualified servers or Cisco UCS B-Series B260 M4 v4 systems can use this module to increase total memory without adding slots. It is not for consumer desktops or workstations that require unbuffered non-ECC UDIMMs. Buyers needing registered RDIMM instead of load-reduced LRDIMM should verify their platform requirements before ordering.
The single specification that determines fit is the 4Rx4 load-reduced organisation combined with DDR4 2133 speed and ECC. Only platforms qualified for this rank structure and voltage will recognise the full 64GB capacity per module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SK hynix inc. |
| Model name | HMAA8GL7MMR4N-TF (MEM-DR464L-HL01-LR21) |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
The module uses the standard 288-pin DDR4 form factor at 2133 MT/s and is Supermicro certified for the B260 M4 v4, so it installs directly into the server's DIMM slots without adapters.
Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the system recognises the full 64GB at DDR4 2133 CL15 in BIOS.
The module runs at 1.20V with no heat spreader and no moving parts; ensure the server's airflow remains unobstructed and apply any B260 M4 v4 BIOS updates from Supermicro for continued compatibility.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?