Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64GB DDR4-2666 CL19 Load Reduced DIMM that overcomes standard RDIMM channel limits to fit more modules per slot for higher server density
This 64 GB SK hynix LRDIMM runs at DDR4-2666 (PC4-21300) with CL19 latency and 1.20 V operation. It carries ECC and a 4Rx4 organisation on a 288-pin form factor. The module is designed for Intel S2600WT server platforms that require registered memory.
Load-Reduced architecture buffers the command, address and data signals to reduce electrical load on the memory controller. This allows more DIMMs per channel than standard RDIMMs while maintaining signal integrity at 2666 MT/s. The design targets virtualization, HPC and in-memory database workloads that keep all channels populated under continuous demand.
DDR4 LRDIMM technology supports module densities up to 128 GB, so this 64 GB stick leaves headroom for future expansion within the same standard. The four-rank layout already uses 16 Gb components to reach its capacity. Systems limited to lower-density RDIMMs cannot reach the same total memory footprint per socket.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SK hynix |
| Model name | HMAA8GL7AMR4N-VK |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
The module operates at 1.20V DDR4 standard voltage; load-reduced architecture reduces electrical load per channel compared with standard RDIMMs, improving energy efficiency during continuous operation.
A 288-pin DDR4 slot with LRDIMM support and a platform qualified for PC4-21300 CL19 4Rx4 modules, such as the Intel S2600WT, is required for correct operation.
No — ECC UDIMMs and ECC registered or load-reduced DIMMs cannot be mixed; all existing UDIMMs must be removed before installing this module.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?