Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a single SFF-8643 host port to four SFF-8482 29-pin SAS drives at 6 Gbps for compact RAID and NAS builds
This 0.5 metre cable converts a single SFF8643 host port on a RAID controller or motherboard into four SFF8482 29pin target interfaces for SAS hard drives. It is built for server, NAS and workstation storage arrays where space is tight. The short run keeps wiring neat and airflow clear inside compact enclosures. No driver installation is required on mainstream Windows or Linux server operating systems.
The cable supports up to 6Gbps bandwidth per lane to meet continuous read and write demands across four drives in RAID configurations. Secure latching connectors on each SFF8482 end prevent accidental disconnection caused by chassis vibration. High quality insulated conductors suppress electromagnetic interference for consistent performance under sustained heavy load. The fixed 0.5 metre length removes excess slack that can obstruct airflow in dense chassis.
This replaces loose fanout cables or longer assemblies that add clutter and restrict airflow in small server and NAS builds. The jump is worthwhile when a controller exposes an SFF8643 host port and you need four direct SAS drive connections without a backplane. It is not for connecting to SFF8643 backplane ports or for driving pure SATA drives without a proper adapter. Verify your controller port type and drive interface before ordering.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 0.5 metre length is designed for short internal runs; measure the distance from your RAID controller SFF8643 port to each drive bay to confirm it reaches without strain.
Check the RAID controller BIOS or OS utility such as smartctl; each drive should report a negotiated 6Gbps SAS link and show no CRC errors during sustained reads.
Only the SFF8643 to four SFF8482 data breakout cable is included; separate SAS power cables or a backplane with integrated power must be sourced for each drive.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?