Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SlimSAS SFF8654 8i PCIe 4.0 host port to dual SFF8087 SAS ports with 32AWG copper at 24Gbps in a .5m antimisdirection design
This 0.5 metre internal harness splits a single SlimSAS SFF8654 8i PCIe 4.0 host port into two independent SFF8087 Mini SAS connectors. It targets system integrators and data centre operators expanding multi drive arrays inside rackmount servers or storage backplanes. The high density breakout design enables direct attachment of SAS hard drives or RAID controllers without additional adapters.
As a passive copper assembly the cable generates no audible noise and adds negligible thermal load to the chassis airflow. Premium 32AWG low loss conductors minimise signal attenuation and crosstalk across the link. Power consumption is limited to the signalling requirements of the connected controller and drives.
The harness replaces older SFF8087 to SFF8087 loom sets when migrating a backplane to a modern SlimSAS SFF8654 8i host interface. It supports up to 24Gbps parallel data transmission for enterprise workloads. The anti misdirection keying prevents reverse insertion errors during dense server assembly. Buyers needing longer reach or different breakout counts should verify alternate cable specifications.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The SFF8654 connector uses an anti-misdirection design that physically blocks reverse insertion; align the keyed notch with the port and push straight in until the latch clicks.
The cable is a passive copper assembly with no moving parts; it does not require scheduled replacement unless physical damage or connector wear appears during inspection.
The harness is rated for 24Gbps aggregate bandwidth across the two SFF8087 branches, so sustained traffic will hit that ceiling first.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?