Rocstorage, Inc Y10A101-W1 DisplayPort to HDMI adapter
- Consumer Electronics
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two sleeved cables convert a 15-pin SATA power connector to a 6-pin Slimline SATA interface for slim optical drives, measuring 20 inches for flexible routing inside PC cases
This two-pack provides a pair of 15-pin SATA male to 6-pin Slimline SATA power adapters. It targets builders upgrading or replacing slim optical drives in desktops, all-in-one PCs or compact storage enclosures. Each cord bridges a standard power supply connector to the specialised slimline interface. No drivers or configuration are required for installation.
The sleeved jacket keeps wires organised, reducing airflow obstruction inside the chassis. Steady power delivery minimises the chance of unstable drive recognition caused by poor contact or voltage drop. Passive construction adds no fan noise and draws no extra power beyond the drive itself. The 20-inch length prevents connector strain during routing.
Sleeved outer cover resists tangling and simplifies cable management in small form factor and full-size cases alike. Direct plug-and-play mating ensures a secure fit without adapters or tools. The pair gives a ready spare for multi-drive builds or future maintenance. Connectors are sized only for the stated slimline SATA optical drives.
Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Plug the 15-pin end into the power supply SATA connector, then align the 6-pin Slimline end with the slim optical drive port. Insert straight without forcing; the 20-inch sleeved length lets you route slack first so no strain pulls the pins out of line.
No scheduled maintenance is required. Periodically check that the sleeved jacket has not been cut by sharp case edges and that both connectors remain fully seated; re-seat if a drive shows intermittent power.
The 20-inch length is the practical limit; routing farther than that adds tension that can unseat the 6-pin Slimline connector and interrupt power to the slim optical drive.
More in Jumper & Adapter Power Cords
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?